邓亮，毛轩，娄思源，基于有限元的剪切拉伸试样几何优化研究[J]，力学季刊，2025 46(1)：193-201。
Deng, Liang.“Numerical study on local contact conditions on rough surface under press hardening.”Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,0(0). pp.1-10,2024
邓亮,娄思源,毛轩,等.铝合金成形中摩擦与润滑的研究进展[J].锻压技术, 2024(9).
邓亮,娄思源,毛轩,等. 水基硅氧烷聚合物润滑剂在铝合金热冲压工况下的润滑可行性[J]. 锻压技术,2024,49(10):195-202.
邓亮, 徐冰倩. 一种模拟热成形工况的高温摩擦试验机的设计及探讨[J]. 润滑与密封, 2023, 48(6): 180-186.
邓亮,徐冰倩.7075铝合金和QRO90模具钢在热成形工况下的摩擦磨损行为[J].润滑与密封, 2023, 48(5):95-102.
邓亮. 汽车用金属板料热成形过程中摩擦行为研究进展[J]. 锻压技术, 2022, 47(4):7.
邓亮. 介观尺度下热成形板料与模具对摩过程有限元模拟[J]. 塑性工程学报, 2022, 29(5):6.
Liang Deng, Leonardo Pelcastre, Jens Hardell, Braham Prakash and Mats Oldenburg. Numerical investigation on the galling in a press hardening experiment with Al-Si coated workpieces, Engineering Failure Analysis. Vol. 99, pp 85-96, 2019.
Liang Deng, Leonardo Pelcastre, Jens Hardell, Braham Prakash and Mats Oldenburg. Experimental evaluation of galling under press hardening conditions, Tribology Letters, 66, pp 93-103, 2018.
Liang Deng, et al., Numerical study of contact conditions in press hardening for tool wear simulation, International Journal of Material forming, 10(5), pp 717-727, 2017.
Liang Deng, et al., Development of a Tribological Test Programme Based on Press Hardening Simulations, 10(2), pp 43-54, 2017.
Sergej Mozgovoy, Liang Deng, Jens Hardell, Mats Oldenburg and Braham Prakash., Effect of temperature on friction and wear of prehardened tool steel during sliding against 22MnB5 steel. Tribology - Materials, Surfaces & Interfaces, 8(2), pp 65 - 73, 2014.
Sergej Mozgovoy, Liang Deng, Jens Hardell, Mats Oldenburg and Braham Prakash., Tribological behavior of tool steel under press hardening conditions using simulative tests. Journal of tribology, 140(1), pp 1-14, 2017.
Thomas Borrvall, Anders Jernberg, Mikael Schill, Liang Deng and Mats Oldenburg. Simulation of wear processes in LS-DYNA. Paper presented at 14th International LS-DYNA User Conference, USA, 2016.
Liang Deng，Modeling of wear and galling in press hardening simulations，Doctoral thesis， Lulea University of Technology，2017.
